Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of standard length satin finish stainless steel cigar shape Mistral performance silencers, these are a high quality, durable and better sounding alternative to the original silencers. Fitted with removable baffles these are road legal with the baffles fitted
Hand made to order in Italy
Brushed stainless steel finish looks great on Cafe Racer and special builds.
Aluminium silencer brackets and silencer clamps included. Suitable for large bore exhaust systems, you may require shims to fit these to standard downpipes
Release the music in your Guzzi!
This part is available by special order, request a quote
£545.00
INC VAT
£454.17 EX VAT
Black 55 litre Junior top box / top case to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets
This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051
This part is available by special order, request a quote
£244.00
INC VAT
£203.33 EX VAT
Pair of standard length polished stainless steel cigar shape Mistral performance silencers, these are a high quality, durable and better sounding alternative to the original silencers. Fitted with removable baffles these are road legal with the baffles fitted
Hand made to order in Italy
Polished stainless steel finish looks great on standard bikes.
Aluminium silencer brackets and silencer clamps included. Suitable for large bore exhaust systems, you may require shims to fit these to standard downpipes
Release the music in your Guzzi!
This part is available by special order, request a quote
£545.00
INC VAT
£454.17 EX VAT
Clamp on bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors
Ideal for models like the V7 Racer where bar ends are fitted. This elegant LSL Clubman mirror fits all 22mm and 1" bars. Fits left or right. Blue tinted glass to reduce glare
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is due back in stock soon, call 01484 841395 to reserve yours
£60.00
INC VAT
£50.00 EX VAT
Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression. This is a 950cc upgrade for 850cc models
Components for one cylinder. The barrel is designed to fit the standard crankcase aperture on 850cc bikes so it is not necessary to modify the crankcase. For the 850 GT it may be necessary to enlarge the pushrod tunnel opening in the head gasket to suit the 850 GT valve gear placement
This part is available by special order, request a quote
18060102-z 18060102 GU18060102 18 06 01 02
1806 0102 1806.0102 18.06.01.02
£311.00
INC VAT
£259.17 EX VAT
Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT
Pair of high performance Dyna 12 volt 5 ohm dual lead ignition coils with angled HT lead socket. These are a performance coil which offer improved starting and performance for twin plugged models
Dyna Performance Replacment twin plug coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount. Guzziology recommends using electronic ignition with these coils as points may not be up to triggering these coils. See ELA00001 for crimp on HT lead connector.
Individual coils available by special order, call us for details
This part is available by special order, request a quote
1471650
£190.00
INC VAT
£158.33 EX VAT
Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of aluminium sheet and coloured shock-resistant plastic.
This part is available by special order, request a quote
£375.00
INC VAT
£312.50 EX VAT
Polished aluminium blanking plate kit, use when fitting a crankshaft mounted ignition to replace the distributor
Includes O ring and two countersunk screws. See ENA90313 for replacement O ring
This part is due back in stock soon, call 01484 841395 to reserve yours
£17.00
INC VAT
£14.17 EX VAT
Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simpifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. The kit consists of:
Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black to special order
This part is available by special order, request a quote
£459.60
INC VAT
£383.00 EX VAT